Page 1, 2
Glue Folding Specifications
1. Remoistenable |
3 heads 5mm or 10mm widths
Minimum distance between heads
(with pullout wheels required between heads, minimum distance is 5) |
3 cc |
| Width of Stahl mail table |
30 1/2 |
| Maximum width sheet when applying remoist to the end of the sheet |
27 ½ |
|
|
|
2 up
10mm width line |
|
|
Standard gutter
minimum size of each piece |
5/16
4 Ό" |
| 5mm width line |
|
Standard gutter
minimum size of each piece |
5/16
4 Ό" |
Non-standard gutter
minimum size of each piece |
9/16"
4 1/8" |
|
|
|
| Minimum sheet size |
4 ½ x 6 |
| Maximum sheet size |
30 11/16 x 45 5/8 |
| Minimum recommended sheet caliper |
.0035" |
Glue strip widths currently available
5mm width is available however the wider width is recommended to ensure best adhesion |
10 mm
|
Minimum distance from edge of
glue strip to edge of sheet |
1/16
|
Minimum distance from end of
glue strip to edge of sheet |
3/16
|
| Minimum distance from edge of glue strip to vital information* |
3/16 |
*Remoist glue adhesion appears to perform better on coated paper compared to uncoated paper the glue sits more on top of the coating therefore coated paper is recommended.
Remoistenable glue does not adhere properly to printed surfaces. Remoist glue areas need to be free of ink and must be free from varnishes, laminates and/or other coatings. The corresponding area that the strip will adhere to must also be free of ink and coatings.
We use hot melt extruded glue it is NOT laser printer compatible.
read more
